Moticam S Series >
Know more about the USB Expert Line
Moticam S3
A good balance - Moticam S3 performs a mid-size capture resolution of 3MP, the data volume is keeping the balance between speed and resolution. A flexible tool for any routine lab, R&D or quality control department. The sCMOS sensor guarantees state-of-the-art imaging results for an unbeatable price.
Product code
1100600101091
553.00€
Prices shown are the Manufacturer’s Suggested Retail Prices (MSRP) and may vary depending on the country. Prices do not include VAT, nor shipping, installation, insurance or any other additional services or taxes. Please note that the optical configuration of this specific model may differ from the objectives shown in the images.
| Model | Moticam S3 |
|---|---|
| Sensor type | sCMOS |
| Sensor size | 1/2.8" |
| Imaging area | 6.44mm (Diagonal) |
| Capture resolution info | 3MP |
| Live display mode through USB | 2048x1536, 1920x1080 pixels |
| Pixel size | 2.5x2.5μm |
| Scan mode | Progressive |
| Shutter mode | Rolling shutter |
| Data transfer | USB 3.1 |
| Max. frames per second (fps) | 2048x1536 @ 60fps 1920x1080 @ 60fps (*) |
| Exposure time | 21 μsec to 2 sec |
| Operating temperature | From -10 to +60 Degrees Celsius non condensing |
| Max. signal to noise ratio | 0.15mV @1/30 sec |
| Sensitivity | 600mV(G) @ 1/30 sec |
| Support device | TWAIN, SDK and DirectShow Driver |
| Minimum computer requirements | 2GHz dualcore - RAM memory 2GB - Video memory min. 512 MB |
| Lens mount | C-Mount |
| Software | Motic Images Plus 3.0 for Windows 10, MAC OSX10.9, Linux UBUNTU1604 or higher |
| Functions | Still image and video capture, live and still image measurement, image adjustments, white balance, automatic & manual exposure, individual objective calibration system. |
| Power supply | 5V (From USB Port) |
| Package includes | CS ring adaptor, USB 3.1 cable, Motic 4-dot calibration slide, Motic Images Plus 3.0 |
| Other features | (*) Frames per second under optimal lighting conditions and in compliance with computer technical requirements. |
| Model | Moticam S3 |
|---|---|
| Sensor type | sCMOS |
| Sensor size | 1/2.8" |
| Imaging area | 6.44mm (Diagonal) |
| Capture resolution info | 3MP |
| Live display mode through USB | 2048x1536, 1920x1080 pixels |
| Pixel size | 2.5x2.5μm |
| Scan mode | Progressive |
| Shutter mode | Rolling shutter |
| Data transfer | USB 3.1 |
| Max. frames per second (fps) | 2048x1536 @ 60fps 1920x1080 @ 60fps (*) |
| Exposure time | 21 μsec to 2 sec |
| Operating temperature | From -10 to +60 Degrees Celsius non condensing |
| Max. signal to noise ratio | 0.15mV @1/30 sec |
| Sensitivity | 600mV(G) @ 1/30 sec |
| Support device | TWAIN, SDK and DirectShow Driver |
| Minimum computer requirements | 2GHz dualcore - RAM memory 2GB - Video memory min. 512 MB |
| Lens mount | C-Mount |
| Software | Motic Images Plus 3.0 for Windows 10, MAC OSX10.9, Linux UBUNTU1604 or higher |
| Functions | Still image and video capture, live and still image measurement, image adjustments, white balance, automatic & manual exposure, individual objective calibration system. |
| Power supply | 5V (From USB Port) |
| Package includes | CS ring adaptor, USB 3.1 cable, Motic 4-dot calibration slide, Motic Images Plus 3.0 |
| Other features | (*) Frames per second under optimal lighting conditions and in compliance with computer technical requirements. |
>
Videos